Fill-rite SD62 Rotary Pump User Manual download pdf

The Fill-Rite SD62 hand operated rotary vane transfer pump,

with its smooth and easy turning handle, can deliver

approximately 7.5 gallons of fluid per minute (100

revolutions).

GENERAL DESCRIPTION

TECHNICAL INFORMATION

Owner's Operation & Safety ManualOwner's Operation & Safety Manual

Owner's Operation & Safety Manual

Design Features:

• 1" NPT inlet, 1" O.D. discharge spout

• Heavy duty cast iron construction

• Smooth, easy action

• 2" NPT threaded bung adapter

• Suction pipe included

Fluid Compatibility

If in doubt about compatibility of a specific fluid, contact

supplier of fluid to check for any adverse reactions to the

following wetted materials:

• Cast Iron

• Galvanized Steel

• Neoprene

The SD62 is compatible with the following fluids:

• Diesel, Kerosene, Machine Oil, Fuel Oil, Agricultural

Fluids, Detergents, Lube Oil, Noncorrosive

Petroleum Products

DO NOT use the SD62 with the following fluids:

• Organic Solvents, Strong Alkalis, Strong Acids, Water

Use oil resistant pipe compound or teflon tape on all threaded

joints.

1. Assemble suction pipe per exploded view of pump.

2. Slip barrel bung over suction pipe nipple.

3. Place assembly into tank or barrel and tighten bung

adaptor mounting flange.

4. Screw pump inlet onto suction pipe nipple.

5. Set pump height by tightening bung adaptor clamp screw

into suction pipe nipple.

1. Rotate handle several times clockwise, (direction

indicated by arrow mark).

2. If a hose is attached to the outlet spout, liquid will be

continuously delivered by siphon effect as long as there

is a head between the liquid levels.

3. Siphon effect stops by turning the handle approximately

30º. Leakage in the hose joints will destroy the siphon

effect. Use care to ensure good connections when

attaching the hose.

Pumps needing repair should be taken to an authorized

repair shop or returned to factory for service. Pumps must be

thoroughly flushed before being returned for repair.

SAFETY INSTRUCTIONS

To ensure safe and efficient operation, it is essential to

read and follow each of these warnings and precautions.

1. Improper use or installation of this product can

cause serious bodily injury or death.

2. Do NOT smoke near pump or use pump near an open

flame. Fire could result.

REPAIR

INSTALLATION

SD62 ROTARY PUMP

This product should not be used for fluid transfer into

aircraft. This product is not suited for use with fluids for

human consumption or fluids containing water.

WARNING

OPERATING INSTRUCTIONS

1 2

SD62 ROTARY PUMP 1
PRODUCT WARRANTY 2

Summary of Contents

Page 1 - SD62 ROTARY PUMP

The Fill-Rite SD62 hand operated rotary vane transfer pump,with its smooth and easy turning handle, can deliverapproximately 7.5 gallons of fluid per

Page 2 - PRODUCT WARRANTY

2SD62G8529 REV. 2ITM. PART NO. NO. DESCRIPTION QTY.SD62 PUMP PARTS LISTTROUBLESHOOTING GUIDEPRODUCT WARRANTYTuthill Transfer Sys

Comments to this Manuals

No comments

Fill-rite SD62 Rotary Pump User Manual

Browse online or download User Manual for Equipment Fill-rite SD62 Rotary Pump. Fill-Rite SD62 Rotary Pump User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Equipment Fill-rite SD62 Rotary Pump