Installation, Operation & Parts Manual Non-Compensated With Thermo Well Assembly No., Single __ TS06AS83 __ TS06
Preparing for Service: Close the belly valve of the supply tank. Close the valve on the vapor return line. Close the manual valve in the supp
11 Flow Meter Maintenance
Meter Disassembly: If your meter is equipped with an electronic register, remove the register and register housing assembly. Disconnect the outl
Inspect the slide valve. Remove and build–up of salts or dirt which may cause the valve to stick. The valve should slide freely without any signs
Air Eliminator Assembly 3/4” Back Check Valve Assembly (Optional) Differential Valve Assembly Item # Qty Description Part # 1 Complete Backc
15 Exploded View
16 Parts List Item # Description QTYSINGLEQTYTWIN1 Relief Valve 1MS84001MS8400R2.a Flange 1" FNPT (ALUM)1MP25681MP2568Flange 1" FBSP (ALUM)
Problem Leakage from seal cover. Product flows through meter but the regis-ter does not operate Breaking teeth on gears. No flow or low flow th
18 SCL & Pulser Assembly SCL (Scaler/Calibrator/Linearizer) Description: Tuthill SCL is a small electronic device de-signed to provide the fu
19 Flow Meter Calibration METER CALIBRATION: Flow meter re-calibration should be on a volume equal to 1 minute of flow at maximum flow rate.
INDEX Safety Procedures 3 Installation & Operations 4-6 Torque & Wrench Chart 5 Meter Maintenance 7-10 Di
20 NOTES
This manual provides warnings and procedures that are intended to inform the owner/operator of the hazards present when using the Tuthill Transfer Sys
Installation: Before Start-up of the Meter, make certain: The meter is properly mounted, secured and piped All shipping plugs are removed and l
Every meter should be calibrated under actual service and installation conditions. Follow your local Weights and Measures recommendations. Provide a
Where the TS06A is used in a commercial or retail LPG dis-penser, the flow meter will be shown in dispenser manufac-turer wiring diagram. When the T
7 Installation & Operation continued TS06A with SCL & ER9044 (ELNC-1141) register, AC powered through EL2057 ELPS-2057 AC power supply
8 Installation & Operation continued TS06A with SCL & ER-9044-2 (ELNC-1141E) register, with Backlight Display & 10:1 Pulse, AC powered
Theory of Operation; The TUTHILL meters LPG metering system combines an oval gear positive displacement meter, differential valve, strainer and vapor
Comments to this Manuals